75 lines
2.2 KiB
Plaintext
75 lines
2.2 KiB
Plaintext
Adafruit's Arduino NINA-W102 firmware 1.7.4 - 2021.06.03
|
|
|
|
* Fixed support for custom hostname in WiFi client mode
|
|
|
|
Adafruit's Arduino NINA-W102 firmware 1.7.3 - 2021.03.26
|
|
|
|
* Changed Analog Write to use full PWM range.
|
|
* Added support to Pin Mode for INPUT_PULLUP.
|
|
|
|
Adafruit's Arduino NINA-W102 firmware 1.7.2 - 2021.03.05
|
|
|
|
* Replace peek() with available() during connection status check to avoid losing messages.
|
|
|
|
Adafruit's Arduino NINA-W102 firmware 1.7.1 - 2020.10.24
|
|
|
|
* Enable HCI BLE for AirLift boards and breakouts.
|
|
|
|
Adafruit's Arduino NINA-W102 firmware 1.6.0 - 2019.12.28
|
|
|
|
* Updated to build with ESP-IDF 3.3.1
|
|
|
|
Adafruit's Arduino NINA-W102 firmware 1.5.0 - 2019.10.21
|
|
|
|
* Added Digital Read and Analog Read
|
|
|
|
Adafruit's Arduino NINA-W102 firmware 1.4.0 - 2019.10.09
|
|
|
|
* Updated to use ESP-IDF 3.3 (LTS)
|
|
* Updated WiFiSSLClient
|
|
* Workflow improvements in Makefile
|
|
|
|
Adafruit's Arduino NINA-W102 firmware 1.3.1 - 2019.04.24
|
|
|
|
* Added WPA2 Enterprise
|
|
* Updated README.md to indicate this is Adafruit's fork
|
|
* Updated README.md with current, reproducible build instructions
|
|
* Updated CHANGELOG with various Adafruit changes
|
|
|
|
Adafruit's Arduino NINA-W102 firmware 1.3.0 - 2019.04.04
|
|
|
|
* Rev'd version in CommandHandler.cpp
|
|
* Added version number to combine.py script
|
|
|
|
Adafruit's Arduino NINA-W102 firmware 1.2.2 - 2019.04.04
|
|
|
|
* Added support for WPA2 Enterprise
|
|
|
|
Adafruit's Arduino NINA-W102 firmware 1.2.2 - 2019.02.28
|
|
|
|
* First official Adafruit release
|
|
|
|
Arduino NINA-W102 firmware 1.2.1 - 2018.11.16
|
|
|
|
* Fixed factory SSL certificates being incorrectly parsed due to OOM caused by Bluetooth inclusion
|
|
|
|
Arduino NINA-W102 firmware 1.2.0 - 2018.11.13
|
|
|
|
* Fixed DNS servers not sticking when static IP address is used
|
|
* Added HCI UART mode on boot, enabled if SS is LOW
|
|
* Erase NVS flash on init failure
|
|
|
|
Arduino NINA-W102 firmware 1.1.0 - 2018.10.4
|
|
|
|
* WiFi is now stopped before connecting to AP
|
|
* Changed default STA hostname to "arduino-XXYY"
|
|
* Switched to all channel scan when connecting to AP in STA mode
|
|
* Fixed static IP's support in STA + AP modes
|
|
* Return failure on bad AP params
|
|
* Moved certificates to separate mmapped partition, added a larger set of built-in root CA's
|
|
* Updated to use esp-idf v3.1
|
|
|
|
Arduino NINA-W102 firmware 1.0.0 - 2018.06.28
|
|
|
|
* Initial release
|