From 1272d3b6402ec188bfac2d1c28ca7034e068b548 Mon Sep 17 00:00:00 2001
From: Mikah Chapman <mikah.chapman@gmail.com>
Date: Sun, 26 Jun 2022 22:10:54 -0600
Subject: [PATCH] Add mounting plate scad

---
 Traeger Controller Mounting Plate.scad | 41 ++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Traeger Controller Mounting Plate.scad

diff --git a/Traeger Controller Mounting Plate.scad b/Traeger Controller Mounting Plate.scad
new file mode 100644
index 0000000..8ca1ccb
--- /dev/null
+++ b/Traeger Controller Mounting Plate.scad	
@@ -0,0 +1,41 @@
+plate_width = 70;
+plate_depth = 140;
+plate_height = 2;
+mounting_hole_diameter = 5;
+mounting_hole_outer_offset = 5.5; 
+mounting_hole_true_offset = mounting_hole_outer_offset + (mounting_hole_diameter/2);
+power_switch_hole_width = 13.5;
+power_switch_hole_depth = 19.9;
+
+oem_pcb_mount_post_diameter = 5;
+oem_pcb_upper_mount_x_outer_dimension = 13;
+oem_pcb_upper_mount_y_outer_dimension = 22.5;
+oem_pcb_upper_mount_center_x = plate_width - oem_pcb_upper_mount_x_outer_dimension + (oem_pcb_mount_post_diameter/2);
+oem_pcb_upper_mount_center_y = oem_pcb_upper_mount_y_outer_dimension - (oem_pcb_mount_post_diameter/2);
+
+oem_pcb_lower_mount_x_outer_dimension = 36.25;
+oem_pcb_lower_mount_y_outer_dimension = 26;
+oem_pcb_lower_mount_center_x = plate_width - oem_pcb_lower_mount_x_outer_dimension + (oem_pcb_mount_post_diameter/2);
+oem_pcb_lower_mount_center_y = plate_depth - oem_pcb_lower_mount_y_outer_dimension + (oem_pcb_mount_post_diameter/2);
+
+oem_pcb_mount_post_height = 40;
+oem_pcb_mount_new_post_diameter = 6;
+
+$fn = 200;
+
+difference() {
+    cube([plate_width, plate_depth, plate_height]);
+    translate([plate_width/2, mounting_hole_true_offset, -0.05]) {
+        cylinder(h= plate_height + 0.1, d = mounting_hole_diameter);
+        translate([0, plate_depth - (mounting_hole_true_offset * 2), 0]) {
+            cylinder(h= plate_height + 0.1, d = mounting_hole_diameter);
+        }
+    }
+}
+
+translate([oem_pcb_upper_mount_center_x, oem_pcb_upper_mount_center_y, 0]) {
+    cylinder(h = oem_pcb_mount_post_height, d = oem_pcb_mount_new_post_diameter);
+}
+translate([oem_pcb_lower_mount_center_x, oem_pcb_lower_mount_center_y, 0]) {
+    cylinder(h = oem_pcb_mount_post_height, d = oem_pcb_mount_new_post_diameter);
+}
\ No newline at end of file