mchapman/zlib
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

zlib 1.2.0

Browse Source
This commit is contained in:
Mark Adler
2011-09-09 23:21:47 -07:00
parent a383133c4e
commit 7c2a874e50
77 changed files with 7236 additions and 2478 deletions
Download Patch File Download Diff File Expand all files Collapse all files

282
zlib.h
View File

@@ -1,7 +1,7 @@
/* zlib.h -- interface of the 'zlib' general purpose compression library
version 1.1.4, March 11th, 2002
version 1.2.0, March 9th, 2003
Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler
Copyright (C) 1995-2003 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
@@ -24,7 +24,7 @@
The data format used by the zlib library is described by RFCs (Request for
Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
(zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
*/
@@ -37,7 +37,7 @@
extern "C" {
#endif
#define ZLIB_VERSION "1.1.4"
#define ZLIB_VERSION "1.2.0"
/*
The 'zlib' compression library provides in-memory compression and
@@ -52,8 +52,23 @@ extern "C" {
application must provide more input and/or consume the output
(providing more output space) before each call.
The compressed data format used by the in-memory functions is the zlib
format, which is a zlib wrapper documented in RFC 1950, wrapped around a
deflate stream, which is itself documented in RFC 1951.
The library also supports reading and writing files in gzip (.gz) format
with an interface similar to that of stdio.
with an interface similar to that of stdio using the functions that start
with "gz". The gzip format is different from the zlib format. gzip is a
gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
The zlib format was designed to be compact and fast for use in memory
and on communications channels. The gzip format was designed for single-
file compression on file systems, has a larger header than zlib to maintain
directory information, and uses a different, slower check method than zlib.
This library does not provide any functions to write gzip files in memory.
However such functions could be easily written using zlib's deflate function,
the documentation in the gzip RFC, and the examples in gzio.c.
The library does not install any signal handler. The decoder checks
the consistency of the compressed data, so the library should never
@@ -244,7 +259,9 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
If deflate returns with avail_out == 0, this function must be called again
with the same value of the flush parameter and more output space (updated
avail_out), until the flush is complete (deflate returns with non-zero
avail_out).
avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
avail_out is greater than six to avoid repeated flush markers due to
avail_out == 0 on return.
If the parameter flush is set to Z_FINISH, pending input is processed,
pending output is flushed and deflate returns with Z_STREAM_END if there
@@ -256,7 +273,7 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
Z_FINISH can be used immediately after deflateInit if all the compression
is to be done in a single step. In this case, avail_out must be at least
0.1% larger than avail_in plus 12 bytes. If deflate does not return
the value returned by deflateBound (see below). If deflate does not return
Z_STREAM_END, then it must be called again as described above.
deflate() sets strm->adler to the adler32 checksum of all input read
@@ -272,7 +289,9 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
consumed and all output has been produced (only when flush is set to
Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
(for example avail_in or avail_out was zero).
(for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not
fatal, and deflate() can be called again with more input and more output
space to continue compressing.
*/
@@ -340,11 +359,9 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
must be called again after making room in the output buffer because there
might be more output pending.
If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much
output as possible to the output buffer. The flushing behavior of inflate is
not specified for values of the flush parameter other than Z_SYNC_FLUSH
and Z_FINISH, but the current implementation actually flushes as much output
as possible anyway.
The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, or
Z_FINISH. Z_SYNC_FLUSH requests that inflate() flush as much output as
possible to the output buffer.
inflate() should normally be called until it returns Z_STREAM_END or an
error. However if all decompression is to be performed in a single step
@@ -354,29 +371,43 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
uncompressed data. (The size of the uncompressed data may have been saved
by the compressor for this purpose.) The next operation on this stream must
be inflateEnd to deallocate the decompression state. The use of Z_FINISH
is never required, but can be used to inform inflate that a faster routine
is never required, but can be used to inform inflate that a faster approach
may be used for the single inflate() call.
If a preset dictionary is needed at this point (see inflateSetDictionary
below), inflate sets strm-adler to the adler32 checksum of the
dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise
it sets strm->adler to the adler32 checksum of all output produced
so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or
an error code as described below. At the end of the stream, inflate()
checks that its computed adler32 checksum is equal to that saved by the
compressor and returns Z_STREAM_END only if the checksum is correct.
In this implementation, inflate() always flushes as much output as
possible to the output buffer, and always uses the faster approach on the
first call. So the only effect of the flush parameter in this implementation
is on the return value of inflate(), as noted below.
If a preset dictionary is needed after this call (see inflateSetDictionary
below), inflate sets strm-adler to the adler32 checksum of the dictionary
chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
strm->adler to the adler32 checksum of all output produced so far (that is,
total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
below. At the end of the stream, inflate() checks that its computed adler32
checksum is equal to that saved by the compressor and returns Z_STREAM_END
only if the checksum is correct.
inflate() will decompress and check either zlib-wrapped or gzip-wrapped
deflate data. The header type is detected automatically. Any information
contained in the gzip header is not retained, so applications that need that
information should instead use raw inflate, see inflateInit2() below, or
inflateBack() and perform their own processing of the gzip header and
trailer.
inflate() returns Z_OK if some progress has been made (more input processed
or more output produced), Z_STREAM_END if the end of the compressed data has
been reached and all uncompressed output has been produced, Z_NEED_DICT if a
preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
corrupted (input stream not conforming to the zlib format or incorrect
adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent
(for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not
enough memory, Z_BUF_ERROR if no progress is possible or if there was not
enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR
case, the application may then call inflateSync to look for a good
compression block.
corrupted (input stream not conforming to the zlib format or incorrect check
value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
Z_BUF_ERROR if no progress is possible or if there was not enough room in the
output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
inflate() can be called again with more input and more output space to
continue decompressing. If Z_DATA_ERROR is returned, the application may then
call inflateSync() to look for a good compression block if a partial recovery
of the data is desired.
*/
@@ -418,6 +449,10 @@ ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
compression at the expense of memory usage. The default value is 15 if
deflateInit is used instead.
windowBits can also be -8..-15 for raw deflate. In this case, -windowBits
determines the window size. deflate() will then generate raw deflate data
with no zlib header or trailer, and will not compute an adler32 check value.
The memLevel parameter specifies how much memory should be allocated
for the internal compression state. memLevel=1 uses minimum memory but
is slow and reduces compression ratio; memLevel=9 uses maximum memory
@@ -464,11 +499,12 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
deflate or deflate2. Thus the strings most likely to be useful should be
put at the end of the dictionary, not at the front.
Upon return of this function, strm->adler is set to the Adler32 value
Upon return of this function, strm->adler is set to the adler32 value
of the dictionary; the decompressor may later use this value to determine
which dictionary has been used by the compressor. (The Adler32 value
which dictionary has been used by the compressor. (The adler32 value
applies to the whole dictionary even if only a subset of the dictionary is
actually used by the compressor.)
actually used by the compressor.) If a raw deflate was requested, then the
adler32 value is not computed and strm->adler is not set.
deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
parameter is invalid (such as NULL dictionary) or the stream state is
@@ -507,8 +543,8 @@ ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
*/
ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
int level,
int strategy));
int level,
int strategy));
/*
Dynamically update the compression level and compression strategy. The
interpretation of level and strategy is as in deflateInit2. This can be
@@ -527,6 +563,15 @@ ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
if strm->avail_out was zero.
*/
ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
uLong sourceLen));
/*
deflateBound() returns an upper bound on the compressed size after
deflation of sourceLen bytes. It must be called after deflateInit()
or deflateInit2(). This would be used to allocate an output buffer
for deflation in a single pass, and so would be called before deflate().
*/
/*
ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
int windowBits));
@@ -542,7 +587,18 @@ ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
input, inflate() will return with the error code Z_DATA_ERROR instead of
trying to allocate a larger window.
inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
determines the window size. inflate() will then process raw deflate data,
not looking for a zlib or gzip header, not generating a check value, and not
looking for any check values for comparison at the end of the stream. This
is for use with other formats that use the deflate compressed data format
such as zip. Those formats provide their own check values. If a custom
format is developed using the raw deflate format for compressed data, it is
recommended that a check value such as an adler32 or a crc32 be applied to
the uncompressed data as is done in the zlib, gzip, and zip formats. For
most applications, the zlib format should be used as is.
inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
memLevel). msg is set to null if there is no error message. inflateInit2
does not perform any decompression apart from reading the zlib header if
@@ -557,14 +613,14 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
Initializes the decompression dictionary from the given uncompressed byte
sequence. This function must be called immediately after a call of inflate
if this call returned Z_NEED_DICT. The dictionary chosen by the compressor
can be determined from the Adler32 value returned by this call of
can be determined from the adler32 value returned by this call of
inflate. The compressor and decompressor must use exactly the same
dictionary (see deflateSetDictionary).
inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
parameter is invalid (such as NULL dictionary) or the stream state is
inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
expected one (incorrect Adler32 value). inflateSetDictionary does not
expected one (incorrect adler32 value). inflateSetDictionary does not
perform any decompression: this will be done by subsequent calls of
inflate().
*/
@@ -584,6 +640,22 @@ ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
until success or end of the input data.
*/
ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
z_streamp source));
/*
Sets the destination stream as a complete copy of the source stream.
This function can be useful when randomly accessing a large stream. The
first pass through the stream can periodically record the inflate state,
allowing restarting inflate at those points when randomly accessing the
stream.
inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
(such as zalloc being NULL). msg is left unchanged in both source and
destination.
*/
ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
/*
This function is equivalent to inflateEnd followed by inflateInit,
@@ -594,6 +666,108 @@ ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
stream state was inconsistent (such as zalloc or state being NULL).
*/
/*
ZEXTERN int ZEXPORT inflateBackInit OF((z_stream FAR *strm, int windowBits,
unsigned char FAR *window));
Initialize the internal stream state for decompression using inflateBack()
calls. The fields zalloc, zfree and opaque in strm must be initialized
before the call. If zalloc and zfree are Z_NULL, then the default library-
derived memory allocation routines are used. windowBits is the base two
logarithm of the window size, in the range 8..15. window is a caller
supplied buffer of that size. Except for special applications where it is
assured that deflate was used with small window sizes, windowBits must be 15
and a 32K byte window must be supplied to be able to decompress general
deflate streams.
See inflateBack() for the usage of these routines.
inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
the paramaters are invalid, Z_MEM_ERROR if the internal state could not
be allocated, or Z_VERSION_ERROR if the version of the library does not
match the version of the header file.
*/
typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *));
typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
ZEXTERN int ZEXPORT inflateBack OF((z_stream FAR *strm,
in_func in, void FAR *in_desc,
out_func out, void FAR *out_desc));
/*
inflateBack() does a raw inflate with a single call using a call-back
interface for input and output. This is more efficient than inflate() for
file i/o applications in that it avoids copying between the output and the
sliding window by simply making the window itself the output buffer. This
function trusts the application to not change the output buffer passed by
the output function, at least until inflateBack() returns.
inflateBackInit() must be called first to allocate the internal state
and to initialize the state with the user-provided window buffer.
inflateBack() may then be used multiple times to inflate a complete, raw
deflate stream with each call. inflateBackEnd() is then called to free
the allocated state.
A raw deflate stream is one with no zlib or gzip header or trailer.
This routine would normally be used in a utility that reads zip or gzip
files and writes out uncompressed files. The utility would decode the
header and process the trailer on its own, hence this routine expects
only the raw deflate stream to decompress. This is different from the
normal behavior of inflate(), which expects either a zlib or gzip header and
trailer around the deflate stream.
inflateBack() uses two subroutines supplied by the caller that are then
called by inflateBack() for input and output. inflateBack() calls those
routines until it reads a complete deflate stream and writes out all of the
uncompressed data, or until it encounters an error. The function's
parameters and return types are defined above in the in_func and out_func
typedefs. inflateBack() will call in(in_desc, &buf) which should return the
number of bytes of provided input, and a pointer to that input in buf. If
there is no input available, in() must return zero--buf is ignored in that
case--and inflateBack() will return a buffer error. inflateBack() will call
out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out()
should return zero on success, or non-zero on failure. If out() returns
non-zero, inflateBack() will return with an error. Neither in() nor out()
are permitted to change the contents of the window provided to
inflateBackInit(), which is also the buffer that out() uses to write from.
The length written by out() will be at most the window size. Any non-zero
amount of input may be provided by in().
For convenience, inflateBack() can be provided input on the first call by
setting strm->next_in and strm->avail_in. If that input is exhausted, then
in() will be called. Therefore strm->next_in must be initialized before
calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called
immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in
must also be initialized, and then if strm->avail_in is not zero, input will
initially be taken from strm->next_in[0 .. strm->avail_in - 1].
The in_desc and out_desc parameters of inflateBack() is passed as the
first parameter of in() and out() respectively when they are called. These
descriptors can be optinally used to pass any information that the caller-
supplied in() and out() functions need to do their job.
On return, inflateBack() will set strm->next_in and strm->avail_in to
pass back any unused input that was provided by the last in() call. The
return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
if in() or out() returned an error, Z_DATA_ERROR if there was a format
error in the deflate stream (in which case strm->msg is set to indicate the
nature of the error), or Z_STREAM_ERROR if the stream was not properly
initialized. In the case of Z_BUF_ERROR, an input or output error can be
distinguished using strm->next_in which will be Z_NULL only if in() returned
an error. If strm->next is not Z_NULL, then the Z_BUF_ERROR was due to
out() returning non-zero. (in() will always be called before out(), so
strm->next_in is assured to be defined if out() returns non-zero.) Note
that inflateBack() cannot return Z_OK.
*/
ZEXTERN int ZEXPORT inflateBackEnd(z_stream FAR *strm);
/*
All memory allocated by inflateBackInit() is freed.
inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
state was inconsistent.
*/
/* utility functions */
@@ -610,8 +784,8 @@ ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen,
/*
Compresses the source buffer into the destination buffer. sourceLen is
the byte length of the source buffer. Upon entry, destLen is the total
size of the destination buffer, which must be at least 0.1% larger than
sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
size of the destination buffer, which must be at least the value returned
by compressBound(sourceLen). Upon exit, destLen is the actual size of the
compressed buffer.
This function can be used to compress a whole file at once if the
input file is mmap'ed.
@@ -627,14 +801,22 @@ ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen,
Compresses the source buffer into the destination buffer. The level
parameter has the same meaning as in deflateInit. sourceLen is the byte
length of the source buffer. Upon entry, destLen is the total size of the
destination buffer, which must be at least 0.1% larger than sourceLen plus
12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
destination buffer, which must be at least the value returned by
compressBound(sourceLen). Upon exit, destLen is the actual size of the
compressed buffer.
compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
memory, Z_BUF_ERROR if there was not enough room in the output buffer,
Z_STREAM_ERROR if the level parameter is invalid.
*/
ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
/*
compressBound() returns an upper bound on the compressed size after
compress() or compress2() on sourceLen bytes. It would be used before
a compress() or compress2() call to allocate the destination buffer.
*/
ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen,
const Bytef *source, uLong sourceLen));
/*
@@ -650,7 +832,7 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen,
uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
enough memory, Z_BUF_ERROR if there was not enough room in the output
buffer, or Z_DATA_ERROR if the input data was corrupted.
buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.
*/
@@ -702,7 +884,7 @@ ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
end of file, -1 for error). */
ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
const voidp buf, unsigned len));
voidpc buf, unsigned len));
/*
Writes the given number of uncompressed bytes into the compressed file.
gzwrite returns the number of uncompressed bytes actually written
@@ -713,7 +895,10 @@ ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
/*
Converts, formats, and writes the args to the compressed file under
control of the format string, as in fprintf. gzprintf returns the number of
uncompressed bytes actually written (0 in case of error).
uncompressed bytes actually written (0 in case of error). The number of
uncompressed bytes written is limited to 4095. The caller should assure
that this limit is not exceeded, since otherwise a buffer overflow may
result.
*/
ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
@@ -755,7 +940,7 @@ ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
*/
ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
z_off_t offset, int whence));
z_off_t offset, int whence));
/*
Sets the starting position for the next gzread or gzwrite on the
given compressed file. The offset represents a number of bytes in the
@@ -867,6 +1052,10 @@ ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
int stream_size));
ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
const char *version, int stream_size));
ZEXTERN int ZEXPORT inflateBackInit_ OF((z_stream FAR *strm, int windowBits,
unsigned char FAR *window,
const char *version,
int stream_size));
#define deflateInit(strm, level) \
deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream))
#define inflateInit(strm) \
@@ -876,6 +1065,9 @@ ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
(strategy), ZLIB_VERSION, sizeof(z_stream))
#define inflateInit2(strm, windowBits) \
inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
#define inflateBackInit(strm, windowBits, window) \
inflateBackInit_((strm), (windowBits), (window), \
ZLIB_VERSION, sizeof(z_stream))
#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)