Merge pull request #3 from docmollo/docs_wpa2_enterprise

Add initial WPA2 Enterprise support

.gitignore

@@ -1 +1,2 @@
 build/
+*.bin

main/CommandHandler.cpp

@@ -22,6 +22,7 @@
 #include <WiFiServer.h>
 #include <WiFiSSLClient.h>
 #include <WiFiUdp.h>
+#include "esp_wpa2.h"
 
 #include "CommandHandler.h"
 
@@ -976,6 +977,74 @@ int setAnalogWrite(const uint8_t command[], uint8_t response[])
   return 6;
 }
 
+int wpa2EntSetIdentity(const uint8_t command[], uint8_t response[]) {
+  char identity[32 + 1];
+
+  memset(identity, 0x00, sizeof(identity));
+  memcpy(identity, &command[4], command[3]);
+
+  esp_wifi_sta_wpa2_ent_set_identity((uint8_t *)identity, strlen(identity));
+
+  response[2] = 1; // number of parameters
+  response[3] = 1; // parameter 1 length
+  response[4] = 1;
+
+  return 6;
+}
+
+int wpa2EntSetUsername(const uint8_t command[], uint8_t response[]) {
+  char username[32 + 1];
+
+  memset(username, 0x00, sizeof(username));
+  memcpy(username, &command[4], command[3]);
+
+  esp_wifi_sta_wpa2_ent_set_username((uint8_t *)username, strlen(username));
+
+  response[2] = 1; // number of parameters
+  response[3] = 1; // parameter 1 length
+  response[4] = 1;
+
+  return 6;
+}
+
+int wpa2EntSetPassword(const uint8_t command[], uint8_t response[]) {
+  char password[32 + 1];
+
+  memset(password, 0x00, sizeof(password));
+  memcpy(password, &command[4], command[3]);
+
+  esp_wifi_sta_wpa2_ent_set_password((uint8_t *)password, strlen(password));
+
+  response[2] = 1; // number of parameters
+  response[3] = 1; // parameter 1 length
+  response[4] = 1;
+
+  return 6;
+}
+
+int wpa2EntSetCACert(const uint8_t command[], uint8_t response[]) {
+  // not yet implemented (need to decide if writing in the filesystem is better than loading every time)
+  // keep in mind size limit for messages
+  return 0;
+}
+
+int wpa2EntSetCertKey(const uint8_t command[], uint8_t response[]) {
+  // not yet implemented (need to decide if writing in the filesystem is better than loading every time)
+  // keep in mind size limit for messages
+  return 0;
+}
+
+int wpa2EntEnable(const uint8_t command[], uint8_t response[]) {
+
+  esp_wpa2_config_t config = WPA2_CONFIG_INIT_DEFAULT();
+  esp_wifi_sta_wpa2_ent_enable(&config);
+
+  response[2] = 1; // number of parameters
+  response[3] = 1; // parameter 1 length
+  response[4] = 1;
+
+  return 6;
+}
 
 typedef int (*CommandHandlerType)(const uint8_t command[], uint8_t response[]);
 
@@ -993,7 +1062,7 @@ const CommandHandlerType commandHandlers[] = {
   disconnect, NULL, getIdxRSSI, getIdxEnct, reqHostByName, getHostByName, startScanNetworks, getFwVersion, NULL, sendUDPdata, getRemoteData, getTime, getIdxBSSID, getIdxChannel, ping, getSocket,
 
   // 0x40 -> 0x4f
-  NULL, NULL, NULL, NULL, sendDataTcp, getDataBufTcp, insertDataBuf, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+  NULL, NULL, NULL, NULL, sendDataTcp, getDataBufTcp, insertDataBuf, NULL, NULL, NULL, wpa2EntSetIdentity, wpa2EntSetUsername, wpa2EntSetPassword, wpa2EntSetCACert, wpa2EntSetCertKey, wpa2EntEnable,
 
   // 0x50 -> 0x5f
   setPinMode, setDigitalWrite, setAnalogWrite,

sdkconfig

@@ -171,6 +171,9 @@ CONFIG_SCAN_DUPLICATE_TYPE=0
 CONFIG_DUPLICATE_SCAN_CACHE_SIZE=200
 CONFIG_BLE_MESH_SCAN_DUPLICATE_EN=
 CONFIG_BTDM_CONTROLLER_FULL_SCAN_SUPPORTED=
+CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_SUPPORTED=y
+CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_NUM=100
+CONFIG_BLE_ADV_REPORT_DISCARD_THRSHOLD=20
 CONFIG_BT_RESERVE_DRAM=0xdb5c
 
 #
@@ -191,6 +194,16 @@ CONFIG_SPI_MASTER_ISR_IN_IRAM=y
 CONFIG_SPI_SLAVE_IN_IRAM=
 CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
 
+#
+# eFuse Bit Manager
+#
+CONFIG_EFUSE_CUSTOM_TABLE=
+CONFIG_EFUSE_VIRTUAL=
+CONFIG_EFUSE_CODE_SCHEME_COMPAT_NONE=
+CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4=y
+CONFIG_EFUSE_CODE_SCHEME_COMPAT_REPEAT=
+CONFIG_EFUSE_MAX_BLK_LEN=192
+
 #
 # ESP32-specific
 #
@@ -288,6 +301,7 @@ CONFIG_ESP32_WIFI_NVS_ENABLED=y
 CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
 CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1=
 CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
+CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
 CONFIG_ESP32_WIFI_DEBUG_LOG_ENABLE=y
 CONFIG_ESP32_WIFI_DEBUG_LOG_DEBUG=
 CONFIG_ESP32_WIFI_DEBUG_LOG_VERBOSE=y
@@ -296,6 +310,7 @@ CONFIG_ESP32_WIFI_DEBUG_LOG_MODULE_WIFI=y
 CONFIG_ESP32_WIFI_DEBUG_LOG_MODULE_COEX=
 CONFIG_ESP32_WIFI_DEBUG_LOG_MODULE_MESH=
 CONFIG_ESP32_WIFI_DEBUG_LOG_SUBMODULE=
+CONFIG_ESP32_WIFI_IRAM_OPT=y
 
 #
 # PHY
@@ -437,6 +452,7 @@ CONFIG_FREERTOS_USE_TRACE_FACILITY=
 CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS=
 CONFIG_FREERTOS_DEBUG_INTERNALS=
 CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
+CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
 
 #
 # Heap memory debugging